Page 75 - Carmex - Metric Catalog 2021

®
Thread Turning Toolholders

Carbide Shank Threading Bars

With coolant bore With internal Min. Bore
coolant bore D1
Carbide Shank Threading Bars
are used when chatter and F
deflection are expected due L1 L D
to long overhang in deep
small bores.

Ordering Code Min Insert Anvil Torx RH LH
Right Hand L D D1 Bore L L1 F Screw Screw Key Anvil Anvil
Diam.
SIR 0005 H06CB 6 6 5.1 6.0 100 26 4.3 S06 - K06 - -
SIR 0007 K08CB 8 8 6.6 7.8 125 31 5.3 S08 - K08 - -
SIR 0008 K08UCB 8U 8 7.3 9.0 125 35 6.6 S08 - K08 - -
SIR 0010 M11CB 11 10 10 12 150 - 7.4 S11 - K11 - -
SIR 0012 P11CB 11 12 12 15 170 - 8.4 S11 - K11 - -
SIR 0016 R16CB 16 16 16 19 200 - 11.7 S16S - K16 - -
* SIR 0020 S16CB 16 20 20 24 250 - 13.7 S16 A16 K16 AI16 AE16
* SIR 0025 S16CB 16 25 25 29 250 - 16.2 S16 A16 K16 AI16 AE16
**SIR 0020 S22CB 22 20 19.3 24 250 100 15.6 S22 - K22 - -

* Carbide shank Threading bars with anvil
** Helix angle: 3.5˚
For LEFT HAND toolholders specify SIL instead of SIR

Vertical Toolholders

Min. Bore

Ordering Code * Min Insert Torx
Right Hand L D Bore L F Screw Key
Diam.
SIR 0040T27V-T10 27 40 48 300 29 S27 K27
SIR 0050U27V-T10 27 50 58 350 34 S27 K27

* To be compared with given minimum bore profile.
For LEFT HAND toolholders specify SIL instead of SIR

A02-11